Straight rectangular to round adapter

Set the connection type and size of each end: width, height and corner radius for the rectangular end, diameter for the round one.

Your model Updating preview

Drag to rotate · Right-drag to pan · Scroll to zoom

Side A

How to measure side A

Caliper jaws placed against the inner edges of a rectangular duct to measure its inside width

Measure the opening inside: the width and the height from one inner edge to the other, and the radius of its rounded corners, whether it is a duct, a tool’s port or a cut-out. This end of the adapter slides into it. Use calipers if you have them, and enter the sizes in millimetres without adding or subtracting clearance.

How to measure the corner radius

Measure the straight part of one edge, from where one corner’s curve ends to where the next begins. Subtract it from the width or height along that edge and halve the result. Sharp corners are 0. If you are between two values, take the larger for a male end and the smaller for a female one, so the corners leave a small gap instead of blocking the fit.

Side B

How to measure side B

Caliper jaws placed around the end of a vacuum hose to measure its outside diameter

Measure across the outside of the hose, pipe or port, from one outer edge to the other. This end of the adapter slides over it. Use calipers if you have them, and enter the sizes in millimetres without adding or subtracting clearance.

Material and colour

Made in ASA. Printed to order.

Grey ASA

Material and colour for this product

Included

Your configuration

Side A: 110 × 55 mm male
Corner radius: 4 mm
Side B: 100 mm female
Material: Grey ASA

Price per item

Updating your model and price

This part is made to the dimensions you enter. Goods made to individual specifications carry no right of withdrawal (Art. 57(3) of the Bulgarian Consumer Protection Act). The legal guarantee of conformity still applies.

Ordering opens soon.

Straight rectangular to round adapter

A: 110 × 55 mm male, radius 4 mm · B: 100 mm female · Grey ASA

Calculating

Ordering opens soon.